Kymco DC CDI, 50cc 2 stroke Grand Dink People Super 9 LC Top Boy Yager etc...

Description

ITEM DESCRIPTION:
Kymco DC Fired CDI Unit
(Unrestricted / No RPM limit)
used on KYMCO 50cc 2 stroke ONLY. Replaces Kymco Part # 40306-454951.
NOTE:
This is an OEM replacement CDI and should be the exact same size and plug configuration as your original box, if not, contact me and I'll help you find the correct one.
Fits these Kymco Models, 2 Stroke ONLY:
Cobra 50cc
Cobra Cross 50cc
Grand Dink 50
Grand Dink 50S
People 50 (US & Canada may be different)
Super 9 LC 50 (Not for Air Cooled, US & Canada may be different)
Top Boy 50
Yager 50
May work on these Eton Models: Please verify this on your own (I'm unable to confirm).
Beamer
Beamer II
Beamer III 50
Matrix 50
Beamer Matrix
Beamer Matrix II
NOTE:
There is an AC fired box that looks exactly the same as this one. See below to learn how to tell if you have an AC or DC CDI system.
NOTE:
Just because the plugs on the CDI are the same as yours does not mean it will work on your machine. There are a few common plug configurations used on all CDIs. You must make sure you have the correct CDI for your machine.
WARNING:
CDI boxes contain sensitive electronics, if you plug the wrong CDI into your machine you have just destroyed the CDI along with your warranty. Any questions?...please ask.
AC or DC?
DC systems gets 12v DC from the battery, AC systems get AC voltage from the stator. To test which system you have, just turn the key on/engine off and check the power wire at your CDI (see wiring picture) if you have 12 volts, you have a DC fired system, if not, kick the motor over while checking for AC voltage (AC system if you have AC voltage). If you don't have power either way, you either have a wiring problem or a bad stator.
NOTE:
The general rule "if it runs without a battery means it's AC" does not always work. Some DC systems will run without the battery because they can get DC voltage from the charging system. Checking the voltage at the CDI is the only sure way to tell which system you have.
This item brought to you by:
Visit my
eBay Store
to see all my items!
RETURNS:
Customer satisfaction is my top priority, as a result, I don’t have many returns. Returns cost both of us time and money so please contact me with any questions you may have before bidding. I will spend as much time and effort as needed to make sure you get the part you need.
CUSTOMER SATISFACTION:
I hope to earn positive feedback and 5 stars from all of my customers. If I don't measure up, please allow me to fix what I did wrong. I'm not perfect, but I will always try to be.
WHY BUY FROM PARTSGALORE?
1) I only sell the best quality parts at very reasonable prices. Everything I sell comes with my personal quality guarantee. 2) I treat my customers with kindness and respect always. 3) I only sell what I have on hand and ready for immediate shipment.