-40%
1/2
1/2
1/2
1/2
1/2

1/2" Drip Irrigation Tubing Hose to 3/4" Faucet Bibb Connector Fittings Adapter

$ 11.61

Availability: 10 in stock
  • Suitable For: Hose
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Brand: Unbranded
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money Back
  • Female Thread Size: 3/4 in
  • Item Width: 4 in
  • Material: Glass reinforced Polypropylene
  • Condition: New
  • Type: Hose Connector
  • All returns accepted: Returns Accepted

    Description

    3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT
    To Install:
    1) Twist collar clockwise toward center of fitting.
    2) Firmly push the end of the irrigation tubing over the exposed barb. If necessary you can warm the tubing by letting it sit in the sun or running hot water or a hair dryer over it so it will stretch over the barb component fairly easily.
    3) Twist collar counter-clockwise to secure tubing or tape.
    Specifications:
    - 3/4" Female Hose Thread x 1/2" or 5/8" Tubing
    - Acceptable Inside Diameter: 0.520 - 0.620 in (13.2 to 15.7mm)
    -Acceptable Wall Thickness: 0.045 to 0.055 in (1.14 to 1.40mm)
    - For use with 16 mm, 17 mm and 18 mm tubing
    - Materials: Glass reinforced Polypropylene
    - Operating pressure up to 60 PSI
    - Positive stop to assure tubing is fully installed
    - Low effort, quickly locks in place, no special tools needed
    - Barbed head ensures distribution tubing will not slip out or blow off at high pressure and temperature
    - To connect Total CV and poly / polyethylene supply tubing or distribution hose tubing
    - Removable lock collar - for flushing or winterizing the drip system
    - Approved for use in waste water systems